[Stephane MASSART]

hi Stephane MASSART,

I have draw the 3D drawing of my system.i drawing the 3D part using Pro-Engineer software.And then i assembly all the part.Can the 3D drawing in Pro-Enginner import to Automgen?How to import it?The motor is connected to the system to move the whole system.So,now i want to know how to do a simulation on the motor motion using Automgen?How to make a 3D simulation on motor?The output is motor can rotate clockwise and anticlockwise and also can control speed of the motor.now,i want to show the 3D simulation on the motor.

Dear Hafizan,
You may import 3DS or VRML 1.0 files into AUTOMGEN. You can use 3D files converter like "crossroads" for converting your file format to one of these 2 formats if your software cannot directly save as 3Ds or VRML 1.0 format.
You can add rotation actions to imported files for simulating motors.

[Wendy]

Dear Hafizan,

Thanks for your interest to use Siemens. Since you want to connect S7-200 CPU to stepper motor, you can consider an additional expansion module which is EM253, positioning module. This card is use for control and position of stepper and servo motor.

The microwin 4.0, programming software for S7-200 PLC has various user friendly wizards which includes positioning wizard.You may use positioningwizard to parameterize your datas required to drive your stepper motor.
Please visit the link below for better understand on the S7-200 CPU and also the capabilities of S7-200.

http://www.automatio...dukte/index.htm

[Zulkifli Bin Kamaruddin]

First of all I would like to thanks CYC for sharing this wonderful PLC programming & automation software with us. I am a lecturer in one of the local university in Malaysia and doing research on Industrial Automation in today's technology world. One of the topic which I am interested in was trying to have one common PLC programming software for all types of PLCs in the market. Of course currently there are some proprietory PLC prgamming softwares produced by some PLC manufacturers which already have IEC1311 compliance and can convert the PLC program to other PLCs by buying the drivers of the said PLC type. However, these PLC programming software are either very expensive or they will sell some of the "drivers" for other PLCs at a very high price, o discourage users to use the software for other PLC types.

For those of you (old timers), I think you have heard or perhaps used a software called "CADEPA" from CANADA before, which is similar to Automgen but very expensive (those days only available in DOS only). But understand that it is no more in the market (die of natural death).

Also, thanks for providing the local supplier website. I will definately going to find out more information and perhaps download the trial version and contact the local supplier for detail information and support which I think is very important.

Once again, thanks CYC for the valuable piece of information.

Ahmad

Hello guys,
It it doesn't matter what brand,For me to understand the principle behind is most important.When I was in overseas I learn most of the brand. Finally it come back to square one. It is when to used what to used? we need to know the component functions and what it is all about only then it easier to do the programming.The language in of programming we must really undertanding behind it.It will help us to do linear or structured programming.

For me automation is about to understand all related system and always up todate with the technology,

Thanks

[praveena]

Hi to all Iam new to this forum and would like to share my experience with regarding an automation software which I have used for my university project. TFirstly, you can use this software to write PLC programs in LD, FBD, SFC and then with the purchased PLC post-processor we can download to the PLC type connected to the PC.


........................................................................................................
plc training in chennai | plc training in india | plc training chennai | plc training in chennai India | plc training in chennai | plc training in india |

[praveena]

Hi to all Iam new to this forum and would like to share my experience with regarding an automation software which I have used for my university project. TFirstly, you can use this software to write PLC programs in LD, FBD, SFC and then with the purchased PLC post-processor we can download to the PLC type connected to the PC.


........................................................................................................
plc training in chennai | plc training in chennai | plc training in madurai | plc training chennai | SEO chennai

[praveena]

I was develop a the PLC programming to drive the stepper motor.So,now i want to know how to do a simulation on the motor?



-----------------------------------------------------------------------
plc training in chennai India | plc training in chennai | plc training in india | plc training in chennai | plc training in chennai | plc training in madurai | plc training chennai | SEO chennai

[sudha100]

:rolleyes:Hello guys,
It it doesn't matter what brand,For me to understand the principle behind is most important.When I was in overseas I learn most of the brand. Finally it come back to square one. It is when to used what to used? we need to know the component functions and what it is all about only then it easier to do the programming.The language in of programming we must really undertanding behind it.It will help us to do linear or structured programming......................




----------------------------------------------------
plc training in chennai India | plc training in chennai | plc training in india | plc training in chennai | plc training in chennai | plc training in madurai |

[jaxrobinson]

Hey thanks for posting this new automation software.Please keep us updated always!!

[seetha]

CYC, on 24 March 2006 - 04:31 PM, said:

I am new to this forum and would like to share my experience with you guys regarding an automation software (bought by my faculty) which I have used for my university project. The name of the software is "AUTOMGEN". Firstly, you can use this software to write PLC programs in LD, FBD, SFC (can be simulated) and then with the purchased PLC post-processors (ABB, Siemens, Omron, Mitsubushi, Alan Bradley, Festo, etc...) we can download to the PLC type connected to the PC. They have about 30+ post processors, I think.

Besides this, they also come with pneumatic, hydraulic, digital electronic and electrical symbol libraries for circuit construction which can be simulated electrically, mechanically or using PLC program. For the more advanced users, they can also import 2D and 3D drawing files and simulate the object with the configured I/Os in respect to the PLC program.

Finally, as an option, we can also add a PCI I/O interface card with 8 I/Os or 16I/Os and connect the inputs and outputs of the PLC program from the PC to interface with actual components (switches, solenoid, etc...)

I am not promoting this software but just to share with you all that there is such a software available in the market. For those of you interested to know the local supplier of this product, may email to me. Meanwhile, I will check with my lecturer the supplier's contact. My email is srilojing@gmail.com

thanks for posting your software programming and best project too keep updating................




................................................................................................................................
industrial automation training chennai/Industrial automation training/industrial automation training chennai