4 replies to this topic

[flyers]

Hi guys,

Do you know any company in KL that can do/fabricate the PLC training kit?

We want to make an Allen Bradley PLC-5 training kit. The kit will have:

DI = 32
DO = 32
AI = 8
AO = 4

DI = push buttons, toggle switch, thumb wheel switch
DO = to relays, LEDs, 7-segment display
AI = potential meter, temp sensor, to terminal block.
AO = Analog mA display meter, to terminal block.

The panel, wiring, and above mentioned accessories by the company. We'll supply the PLC & programming.

We can suggest for the part location, or can be design by the company, either way will do, as long as it ease the user.

If you come across any company can provide this please contact me. Thanks.

[Juravic]

Please contact us :

Juravic Engineering Sdn Bhd
Tel: 03-9286 4773
Fax: 03-9286 4772
email: jesb@juravic.com.my
www.juravic.com.my

We have built similar training units with 24DI/16DO and 8AI/2AO using Siemens PLC.

Henry Choong

[SLYEP]

Hi,

You may reach me at 0123800891 in future.

Thank you

Regards.
SL Yep

Hi guys,

Do you know any company in KL that can do/fabricate the PLC training kit?

We want to make an Allen Bradley PLC-5 training kit. The kit will have:

DI = 32
DO = 32
AI = 8
AO = 4

DI = push buttons, toggle switch, thumb wheel switch
DO = to relays, LEDs, 7-segment display
AI = potential meter, temp sensor, to terminal block.
AO = Analog mA display meter, to terminal block.

The panel, wiring, and above mentioned accessories by the company. We'll supply the PLC & programming.

We can suggest for the part location, or can be design by the company, either way will do, as long as it ease the user.

If you come across any company can provide this please contact me. Thanks.

[lsloo]

Hi guys,

Do you know any company in KL that can do/fabricate the PLC training kit?

We want to make an Allen Bradley PLC-5 training kit. The kit will have:

DI = 32
DO = 32
AI = 8
AO = 4

DI = push buttons, toggle switch, thumb wheel switch
DO = to relays, LEDs, 7-segment display
AI = potential meter, temp sensor, to terminal block.
AO = Analog mA display meter, to terminal block.

The panel, wiring, and above mentioned accessories by the company. We'll supply the PLC & programming.

We can suggest for the part location, or can be design by the company, either way will do, as long as it ease the user.

If you come across any company can provide this please contact me. Thanks.

[lsloo]

Hi flyer, you may contact mr clarence at 016-261 8060 or 012-287 2865.
he had more than 10 years experience at AB PLC.